Countertop Games

 

 

MAXX FORCE (continued) FORCE (continued)
Megatouch MAXX Sapphire 2 Megatouch FORCE Elite 2007.5 Megatouch FORCE Elite Edge 2007.5
Megatouch MAXX Jade 2 Megatouch FORCE Elite 2008.5 Megatouch FORCE Elite Edge 2008.5
Megatouch MAXX Upright Ruby 2 Megatouch FORCE Elite 2009.5 Megatouch FORCE Elite Edge 2010.5
  Megatouch FORCE Elite 2010.5 Megatouch FORCE Fusion 2008.5
FORCE Megatouch FORCE Vibe 2006.5 Megatouch FORCE Fusion 2009.5
Megatouch FORCE Classic 2006.5 Megatouch FORCE Vibe 2007.5 Megatouch FORCE Fusion 2010.5
Megatouch FORCE Classic 2007.5 Megatouch FORCE Vibe 2008.5 Megatouch FORCE PORTABLE
Megatouch FORCE Classic 2008.5 Megatouch FORCE Vibe 2009.5  
Megatouch FORCE Radion 2006.5 Megatouch FORCE Vibe 2010.5 ION
Megatouch FORCE Radion 2007.5 Megatouch FORCE eVo 2007.5 Megatouch ION eVo 2009.5
Megatouch FORCE Radion 2008.5 Megatouch FORCE eVo 2008.5 Megatouch ION eVo 2010.5
Megatouch FORCE Radion 2009.5 Megatouch FORCE eVo 2009.5 Megatouch ION Elite Edge 2010.5
Megatouch FORCE Radion 2010.5 Megatouch FORCE eVo 2010.5 Megatouch ION Aurora 2010.5
Megatouch FORCE Upright 2006.5 Megatouch GAMETIME 2008.5 Megatouch ION PORTABLE
     

 

 

 

 

 

Pinball Machines

 

 

PLEASE CALL
Addams Family $5700.00
Batman $2200.00
Elvis $4600.00
Indiana Jones $6200.00
Star Trek: Next Generation $5600.00
Super Mario Bros. $3200.00
Pirates of the Caribbean $4600.00
TRON Legacy $7200.00
White Water $5500.00

 

 

 

 

 

Video Games

 

 

Arctic Thunder $900.00
Big Buck Hunter $850.00
Big Buck Hunter 2006 $975.00
Big Buck Hunter II $900.00
Big Buck Hunter PRO $2,300.00
Big Buck Hunter Safari $2,600.00
Big Tony's PokerKard $2,400.00
California Speed $775.00
Carnevil $1,050.00
Carnival King $800.00
Cruisin Exotica $1,100.00
Cruisin USA $850.00
Cruisin World $875.00
Dance Dance Revolution Extreme $2,900.00
Dance Dance Revolution Supernova $3,500.00
Daytona USA 2 $1,050.00
Extreme Hunting 2 $950.00
Fast and the Furious $2,150.00
Fast and the Furious Drift (Conversion) $2,500.00
Fast and the Furious Superbikes $3,400.00
Ghost Squad 27" Standard call
Ghost Squad 50" Dlx call
Golden Tee 2005 $650.00
Golden Tee Complete Dedicated (Refurbished) $1,250.00
Golden Tee Complete Non-Dedicated $1,200.00
Golden Tee Live 2009 $1,500.00
Golden Tee Live 2012 $1,950.00
H20 Overdrive $4,800.00
House of the Dead 2 Standard $1,150.00
House of the Dead 4 Standard $1,800.00
Hydro Thunder $800.00
In The Groove 2 Dedicated call
Jurassic Park III call
JVL Orion call
Nascar (Gloval VR) $3,800.00
Nascar (SEGA) $1,400.00
NFL Blitz $825.00
Nicktunes Nitro $2,800.00
Offroad Challenge $750.00
Offroad Thunder $850.00
Pacman Party Cocktail call
Rockin Bowl-O-Rama $1,900.00
Silver Strike Bowling $900.00
Sonic All-Stars Racing $3,900.00
Star Wars Trilogy (Upright) $1,900.00
Super Shuffle $2,400.00
Target Terror $1,250.00
Target Toss Pro: BAGS $1,100.00
Terminator Salvation Deluxe $7,200.00
Terminator Salvation Standard $4,900.00
Time Crisis 3 $1,300.00
Turkey Hunting $775.00
Ultracade call
WSP: Heads-Up Challenge $1,400.00

 

 

 

 

 


 

 

Megatouch MAXX Blue Sapphire 2

Item #MTMBSw

 

This Megatouch is part of the MAXX series and comes in the Blue Classic cabinet. This cabinet is a blue version of the common Classic cabinet, recognized everywhere as a Megatouch. The black steel frame and blue formica sides create an attractive and extremely durable house for all the games and value this machine has to offer. The Sapphire 2 software is one of the most successful releases ever and offers just over 100 games. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

On the outside, this Blue Classic looks like many you may have seen in bars and restaurants over nearly the past decade. This one will look better up close than any others you'll find since we use only the best condition frames and sides (otherwise we trash them) and replace the T-molding with new. On the inside, we also use only the best as there are quite a few different monitor brands that were put into these machines of various quality, and we only re-install the top quality ones (used in the later stages of the production run) during our re-build. All other hardware components are typically replaced with new parts, the only exception being the motherboard assembly which is removed and serviced to improve performance and reliability. Despite the age difference between this machine and the newer ones below, this machine is actually more reliable after being properly refurbished. Of course it is also much superior to others that have not been refurbished...

 

WHAT YOU GET FROM US VS MOST OTHERS
Only the best, top quality monitor brand used in the later stages of the production run. A bright and colorful screen and serviced circuitry (if necessary). No burn-ins, image alterations, or noises. VS If it's not the top quality brand, it's going to go bad. A monitor that "works" can also have horrible burn-in and alterations, not visibile in pictures. In other words, you can play the game but it might not look good.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Voltage is checked for accuracy with a volt-meter. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to keep the machine running cool; often better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always original, dirty, slow, loud fans. Whether it "works" or not, a machine with bad fans will be loud and able to cook itself into dis-repair in a hurry. These cabinets can become like clogged, overheated vaccums.  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost a very hundred dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 20" W x 21" D x 16" T; weight is approx. 75 lbs.

 

 

     

 

  $645

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch MAXX Upright Ruby 2

Item #MTMURRw

 

This Megatouch is part of the MAXX series and comes in the Upright cabinet, also known as a "stand-up" because it stands up rather than sitting on a bar or table, and players can stand up or sit on a chair to play it. The MAXX Ruby 2 software offers a little of everything with just over 80 games, including a handful of Erotic games just for adults. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Upright cabinet is much less common than all the other countertop Megatouches, but that doesn't mean it's not a good investment. The games are the same, most of the hardware is the same...it's just housed in a bigger cabinet (which makes it harder to move and ship) that can be placed anywhere. If you want a lower cost Megatouch but don't have a sturdy table surface to put one on, then the MAXX Upright is the one for you. The MAXX hardware is getting to be pretty old now, so we've replaced just about every component and serviced the motherboard. Here is what we do vs what "they" don't do...

 

WHAT YOU GET FROM US VS MOST OTHERS
A bright and sharp 19" CRT (tube) monitor. All of our Uprights have Tatung brand monitors that are very reliable. But we check and service the chassis board anyways, and make sure the tube is good and the flyback transformer is like new. VS More often than not, a monitor tube that will become out of focus and have white "scan lines" after the machine is on for an hour. This is because the flyback goes bad, and rather than replacing it most people turn up the voltage knob. This can be repaired (we charge $200+) but usually there is permanent damage.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 23" W x 28.5" D x 61" T; weight is approx. 225 lbs.

 

If you would like newer software with more games, just let us know! It can be upgraded.

 

 

     

 

  $695

 

  + $325 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Classic 2006.5

Item #MTFC06w

 

This Megatouch is part of the FORCE series and comes in the tradional Classic cabinet. Used in the previous XL and MAXX platforms, the Classic cabinet design is tried and true and has few drawbacks (but no frills) compared to other FORCE cabinet models. The FORCE 2006.5 software offers great value with 130 games. Newer games include Texas Hold'em, Sudoku 6, Monkey Bash, and Feeding Frosty. Erotic and Kids Club games (either category enabled at one time) are also available with some newer games there as well. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Classic cabinet design had been used for so long in previous platforms that Merit decided to use it for the FORCE platform as well. The only change they made was the monitor brand, opting to use only the most reliable (Tatung) in all new builds. The Classic may be heavier and more "box-like" than the newer FORCE cabinet models, but it still offers plenty of interior room for cooling and maintenance, and an incredibly reliable monitor. Given the age of these units now, most hardware components are due for overhaul or replacement. The original fans often work but sound (and function) like small vaccum cleaners, so we replace those too. Typically the wood/formica sides will also be beat up, so we swap on a better set if necessary and ALWAYS replace the T-molding. To compare this to most other FORCE Classics you'll find, read this...

 

WHAT YOU GET FROM US VS MOST OTHERS
A real FORCE Classic cabinet, not an older XL or MAXX that has been mysteriously converted. This also means that you get a Tatung monitor with the best picture quality and outsanding reliability. VS If the side of the base is stamped with metal, it's an old conversion. Who knows what the age and condition of the parts inside are? Many people will literally "stuff" FORCE components into one of these old cabinets and call it a "Classic".  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Voltage is checked for accuracy with a volt-meter. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to keep the machine running cool; often better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS The case fans in a Classic cabinet are like mini vaccums, in that they literally suck in dust and are extremely LOUD. Replacing the fans isn't expensive...but then why didn't the previous owner replace them?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 20" W x 21" D x 16" T; weight is approx. 75 lbs.

 

 

     

 

  $750

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Classic 2007.5

Item #MTFC07w

 

This Megatouch is part of the FORCE series and comes in the tradional Classic cabinet. Used in the previous XL and MAXX platforms, the Classic cabinet design is tried and true and has few drawbacks (but no frills) compared to other FORCE cabinet models. The FORCE 2007.5 software is a best-seller and offers up 140 games including popular newcomers like Luxor, Chug Monkey, and Texas Hold'em. Erotic and Kids Club games (either category enabled at one time) are also available and plentiful. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Classic cabinet design had been used for so long in previous platforms that Merit decided to use it for the FORCE platform as well. The only change they made was the monitor brand, opting to use only the most reliable (Tatung) in all new builds. The Classic may be heavier and more "box-like" than the newer FORCE cabinet models, but it still offers plenty of interior room for cooling and maintenance, and an incredibly reliable monitor. Given the age of these units now, most hardware components are due for overhaul or replacement. The original fans often work but sound (and function) like small vaccum cleaners, so we replace those too. Typically the wood/formica sides will also be beat up, so we swap on a better set if necessary and ALWAYS replace the T-molding. To compare this to most other FORCE Classics you'll find, read this...

 

WHAT YOU GET FROM US VS MOST OTHERS
A real FORCE Classic cabinet, not an older XL or MAXX that has been mysteriously converted. This also means that you get a Tatung monitor with the best picture quality and outsanding reliability. VS If the side of the base is stamped with metal, it's an old conversion. Who knows what the age and condition of the parts inside are? Many people will literally "stuff" FORCE components into one of these old cabinets and call it a "Classic".  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Voltage is checked for accuracy with a volt-meter. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to keep the machine running cool; often better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS The case fans in a Classic cabinet are like mini vaccums, in that they literally suck in dust and are extremely LOUD. Replacing the fans isn't expensive...but then why didn't the previous owner replace them?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 20" W x 21" D x 16" T; weight is approx. 75 lbs.

 

 

     

 

  $795

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Classic 2008.5

Item #MTFC08w

 

This Megatouch is part of the FORCE series and comes in the tradional Classic cabinet. Used in the previous XL and MAXX platforms, the Classic cabinet design is tried and true and has few drawbacks (but no frills) compared to other FORCE cabinet models. We have customized this unit by creating a glow kit that glows purple (to match the software) in the front and rear of the machine. The FORCE 2008.5 software is loaded with 128 unique games including new titles like Photo Pop, Ink Rally, and Chainz 2. Erotic and Kids Club games (either category enabled at one time) are also available and have been updated for this software version. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Classic cabinet design had been used for so long in previous platforms that Merit decided to use it for the FORCE platform as well. The only change they made was the monitor brand, opting to use only the most reliable (Tatung) in all new builds. The Classic may be heavier and more "box-like" than the newer FORCE cabinet models, but it still offers plenty of interior room for cooling and maintenance, and an incredibly reliable monitor. Given the age of these units now, most hardware components are due for overhaul or replacement. The original fans often work but sound (and function) like small vaccum cleaners, so we replace those too. Typically the wood/formica sides will also be beat up, so we swap on a better set if necessary and ALWAYS replace the T-molding. To compare this to most other FORCE Classics you'll find, read this...

 

WHAT YOU GET FROM US VS MOST OTHERS
A real FORCE Classic cabinet, not an older XL or MAXX that has been mysteriously converted. This also means that you get a Tatung monitor with the best picture quality and outsanding reliability. VS If the side of the base is stamped with metal, it's an old conversion. Who knows what the age and condition of the parts inside are? Many people will literally "stuff" FORCE components into one of these old cabinets and call it a "Classic".  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Voltage is checked for accuracy with a volt-meter. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to keep the machine running cool; often better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS The case fans in a Classic cabinet are like mini vaccums, in that they literally suck in dust and are extremely LOUD. Replacing the fans isn't expensive...but then why didn't the previous owner replace them?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 20" W x 21" D x 16" T; weight is approx. 75 lbs.

 

 

     

 

  $850

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Radion 2006.5

Item #MTFR06w

 

This Megatouch is part of the FORCE series and comes in the sleek Radion cabinet. The Radion features a durable ABS plastic cabinet structure as opposed to the heavier steel and wood frame on the previous (Classic) model and a high-resolution enabled CRT (tube style) monitor. The FORCE 2006.5 software offers great value with 130 games. Newer games include Texas Hold'em, Sudoku 6, Monkey Bash, and Feeding Frosty. Erotic and Kids Club games (either category enabled at one time) are also available with some newer games there as well. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Radion had a long production run so there are a lot of them out there, but they have issues that are as common as the model itself. First, all Radion units suffer from a poor quality picture tube that dims and ultimately fails prematurely. That, combined with the normal FORCE hardware components that need service/replacing at this stage of their service life (over 5 years in), creates the need for a lot of overhaul on these units. On the outside, the ABS plastic parts are durable but tend to show a lot of wear in the finish over the years, which can become unsightly. By rebuilding these machines inside and out, with new cabinet parts as necessary, we can guarantee that every machine will function like new and look as close to new as possible. You won't find a Radion that has been gone through more than one of ours. If they don't specifically state otherwise, they are selling a Radion with dirty, failing, 6-8 year old parts. This is a detailed comparison of our product vs nearly all other used Radions out there...

 

WHAT YOU GET FROM US VS MOST OTHERS
A new monitor tube, properly installed and adjusted to last for a long, long time. Monitor circuit board electronics are cleaned and serviced as necessary. VS An original, notoriously defective tube, that has been kept alive by cranking up the high voltage knob beyond its normal range -- this eventually kills the tube AND the circuit board. A bad tube can even be made to look good in pictures.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Voltage is checked for accuracy with a volt-meter. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to keep the machine running cool; often better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always original, dirty, slow, loud fans. Whether it "works" or not, a machine with bad fans will be loud and able to cook itself into dis-repair in a hurry. Some techs call the Radions "Roasters" for this reason.  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 20" W x 19" D x 15" T; weight is approx. 70 lbs.

 

 

     

 

  $795

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Radion 2007.5

Item #MTFR07w

 

This Megatouch is part of the FORCE series and comes in the sleek Radion cabinet. The Radion features a durable ABS plastic cabinet structure as opposed to the heavier steel and wood frame on the previous (Classic) model and a high-resolution enabled CRT (tube style) monitor. The FORCE 2007.5 software is a best-seller and offers up 140 games including popular newcomers like Luxor, Chug Monkey, and Texas Hold'em. Erotic and Kids Club games (either category enabled at one time) are also available and plentiful. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Radion had a long production run so there are a lot of them out there, but they have issues that are as common as the model itself. First, all Radion units suffer from a poor quality picture tube that dims and ultimately fails prematurely. That, combined with the normal FORCE hardware components that need service/replacing at this stage of their service life (over 5 years in), creates the need for a lot of overhaul on these units. On the outside, the ABS plastic parts are durable but tend to show a lot of wear in the finish over the years, which can become unsightly. By rebuilding these machines inside and out, with new cabinet parts as necessary, we can guarantee that every machine will function like new and look as close to new as possible. You won't find a Radion that has been gone through more than one of ours. If they don't specifically state otherwise, they are selling a Radion with dirty, failing, 6-8 year old parts. This is a detailed comparison of our product vs nearly all other used Radions out there...

 

WHAT YOU GET FROM US VS MOST OTHERS
A new monitor tube, properly installed and adjusted to last for a long, long time. Monitor circuit board electronics are cleaned and serviced as necessary. VS An original, notoriously defective tube, that has been kept alive by cranking up the high voltage knob beyond its normal range -- this eventually kills the tube AND the circuit board. A bad tube can even be made to look good in pictures.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Voltage is checked for accuracy with a volt-meter. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to keep the machine running cool; often better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always original, dirty, slow, loud fans. Whether it "works" or not, a machine with bad fans will be loud and able to cook itself into dis-repair in a hurry. Some techs call the Radions "Roasters" for this reason.  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 20" W x 19" D x 15" T; weight is approx. 70 lbs.

 

 

     

 

  $845

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Radion 2008.5

Item #MTFR08w

 

This Megatouch is part of the FORCE series and comes in the sleek Radion cabinet. The Radion features a durable ABS plastic cabinet structure as opposed to the heavier steel and wood frame on the previous (Classic) model and a high-resolution enabled CRT (tube style) monitor. The FORCE 2008.5 software is loaded with 128 unique games including new titles like Photo Pop, Ink Rally, and Chainz 2. Erotic and Kids Club games (either category enabled at one time) are also available and have been updated for this software version. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Radion had a long production run so there are a lot of them out there, but they have issues that are as common as the model itself. First, all Radion units suffer from a poor quality picture tube that dims and ultimately fails prematurely. That, combined with the normal FORCE hardware components that need service/replacing at this stage of their service life (over 5 years in), creates the need for a lot of overhaul on these units. On the outside, the ABS plastic parts are durable but tend to show a lot of wear in the finish over the years, which can become unsightly. By rebuilding these machines inside and out, with new cabinet parts as necessary, we can guarantee that every machine will function like new and look as close to new as possible. You won't find a Radion that has been gone through more than one of ours. If they don't specifically state otherwise, they are selling a Radion with dirty, failing, 6-8 year old parts. This is a detailed comparison of our product vs nearly all other used Radions out there...

 

WHAT YOU GET FROM US VS MOST OTHERS
A new monitor tube, properly installed and adjusted to last for a long, long time. Monitor circuit board electronics are cleaned and serviced as necessary. VS An original, notoriously defective tube, that has been kept alive by cranking up the high voltage knob beyond its normal range -- this eventually kills the tube AND the circuit board. A bad tube can even be made to look good in pictures.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Voltage is checked for accuracy with a volt-meter. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to keep the machine running cool; often better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always original, dirty, slow, loud fans. Whether it "works" or not, a machine with bad fans will be loud and able to cook itself into dis-repair in a hurry. Some techs call the Radions "Roasters" for this reason.  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 20" W x 19" D x 15" T; weight is approx. 70 lbs.

 

 

     

 

  $925

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Vibe 2006.5

Item #MTFV06w

 

This Megatouch is part of the FORCE series and comes in the unique Vibe cabinet. The Vibe is different from all other Megatouch cabinet models in that it has two pieces -- a 15" LCD display unit and a processing unit -- that are connected only by a 5 ft cable harness. This means that you can keep the processing unit safely tucked away while the display unit sits on the bar, taking up less space than any other Megatouch today. The FORCE 2006.5 software offers great value with 130 games. Newer games include Texas Hold'em, Sudoku 6, Monkey Bash, and Feeding Frosty. Erotic and Kids Club games (either category enabled at one time) are also available with some newer games there as well. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play. Due to its ultra compact size, this model does not accept quarters. An optional stability base is included upon request.

 

What's the difference?

 

The two-piece Vibe is a great cabinet design and the only one of its kind. Even though newer models are all-in-one compacts, they suffer from overheating while the Vibe does not. Having the processing unit separate from the display means that the design focus can be more about functionality than aesthetics, with easy access to hardware components, plenty of airflow, and easy transportation by disconnecting the two units. The swiveling display unit is as compact as it gets. Like any other FORCE though, this machine has 5+ year old components that are due for service or replacement in order to function reliably. For details on this, read below...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Voltage is checked for accuracy with a volt-meter. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to keep the machine running cool; often better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Old and LOUD fans that are covered in gunk and no longer doing their job properly. The fans in the Vibe are right at a vented edge of the processing unit, and when the bearings wear out you will hear them.  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Display unit dimensions are 16" W x 11" W x 18" T; weight is approx. 40 lbs. without base.

Processing unit dimensions are 12" W x 15" W x 4.5" T; weight is approx. 20 lbs.

 

 

     

 

  $995

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Vibe 2008.5

Item #MTFV08w

 

This Megatouch is part of the FORCE series and comes in the unique Vibe cabinet. The Vibe is different from all other Megatouch cabinet models in that it has two pieces -- a 15" LCD display unit and a processing unit -- that are connected only by a 5 ft cable harness. This means that you can keep the processing unit safely tucked away while the display unit sits on the bar, taking up less space than any other Megatouch today. The FORCE 2008.5 software is loaded with 128 unique games including new titles like Photo Pop, Ink Rally, and Chainz 2. Erotic and Kids Club games (either category enabled at one time) are also available and have been updated for this software version. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.Due to its ultra compact size, this model does not accept quarters. An optional stability base is included upon request.

 

What's the difference?

 

The two-piece Vibe is a great cabinet design and the only one of its kind. Even though newer models are all-in-one compacts, they suffer from overheating while the Vibe does not. Having the processing unit separate from the display means that the design focus can be more about functionality than aesthetics, with easy access to hardware components, plenty of airflow, and easy transportation by disconnecting the two units. The swiveling display unit is as compact as it gets. Like any other FORCE though, this machine has 5+ year old components that are due for service or replacement in order to function reliably. For details on this, read below...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Voltage is checked for accuracy with a volt-meter. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to keep the machine running cool; often better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Old and LOUD fans that are covered in gunk and no longer doing their job properly. The fans in the Vibe are right at a vented edge of the processing unit, and when the bearings wear out you will hear them.  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Display unit dimensions are 16" W x 11" W x 18" T; weight is approx. 40 lbs. without base.

Processing unit dimensions are 12" W x 15" W x 4.5" T; weight is approx. 20 lbs.

 

 

     

 

  $1100

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Vibe 2010.5

Item #MTFV10w

 

This Megatouch is part of the FORCE series and comes in the unique Vibe cabinet. The Vibe is different from all other Megatouch cabinet models in that it has two pieces -- a 15" LCD display unit and a processing unit -- that are connected only by a 5 ft cable harness. This means that you can keep the processing unit safely tucked away while the display unit sits on the bar, taking up less space than any other Megatouch today. The FORCE 2010.5 software is about as good as the FORCE series gets with 137 unique games, including new releases like Megatouch Memory, Touchdown Poker and Stunt Squirrel. Erotic and Kids Club games (either category enabled at one time) are also available and have been updated with even more content. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.Due to its ultra compact size, this model does not accept quarters. An optional stability base is included upon request.

 

What's the difference?

 

The two-piece Vibe is a great cabinet design and the only one of its kind. Even though newer models are all-in-one compacts, they suffer from overheating while the Vibe does not. Having the processing unit separate from the display means that the design focus can be more about functionality than aesthetics, with easy access to hardware components, plenty of airflow, and easy transportation by disconnecting the two units. The swiveling display unit is as compact as it gets. Like any other FORCE though, this machine has 5+ year old components that are due for service or replacement in order to function reliably. For details on this, read below...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Voltage is checked for accuracy with a volt-meter. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to keep the machine running cool; often better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Old and LOUD fans that are covered in gunk and no longer doing their job properly. The fans in the Vibe are right at a vented edge of the processing unit, and when the bearings wear out you will hear them.  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Display unit dimensions are 16" W x 11" W x 18" T; weight is approx. 40 lbs. without base.

Processing unit dimensions are 12" W x 15" W x 4.5" T; weight is approx. 20 lbs.

 

 

     

 

  $1350

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE eVo 2007.5

Item #MTFEB07w

 

This Megatouch is part of the FORCE series and comes in the compact eVo cabinet. The eVo is the top product of the FORCE line-up, taking cues from previous models and packing everything into one unit behind a 15" LCD and flat touchscreen. The FORCE 2007.5 software is a best-seller and offers up 154 games including popular newcomers like Luxor, Chug Monkey, and Texas Hold'em. Erotic and Kids Club games (either category enabled at one time) are also available and plentiful. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The eVo is the culmination of all previous FORCE models, but it is far from perfect. The main problem is that, with everything arranged and packed so close together inside, the eVo tends to overheat very quickly when the dust builds up and the small fans wear out. This overheating reduces the life of the components inside, meaning that the already poor quality hard drive, power supply and motherboard may only last 2-3 years instead of 4-6. Many eVos that we take in to refurbish may appear to work fine at first, but we take apart and rebuild the whole thing regardless to ENSURE that it works just like when it left the assembly line, and for a long time. So how much better is our final product than a used machine taken right off the street? Let's compare...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to give the eVo the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15" D x 19" T; weight is approx. 65 lbs.

 

 

     

 

  $1350

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE eVo 2008.5

Item #MTFEB08w

 

This Megatouch is part of the FORCE series and comes in the compact eVo cabinet. The eVo is the top product of the FORCE line-up, taking cues from previous models and packing everything into one unit behind a 15" LCD and flat touchscreen. The FORCE 2008.5 software is loaded with 128 unique games including new titles like Photo Pop, Ink Rally, and Chainz 2. Erotic and Kids Club games (either category enabled at one time) are also available and have been updated for this software version. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The eVo is the culmination of all previous FORCE models, but it is far from perfect. The main problem is that, with everything arranged and packed so close together inside, the eVo tends to overheat very quickly when the dust builds up and the small fans wear out. This overheating reduces the life of the components inside, meaning that the already poor quality hard drive, power supply and motherboard may only last 2-3 years instead of 4-6. Many eVos that we take in to refurbish may appear to work fine at first, but we take apart and rebuild the whole thing regardless to ENSURE that it works just like when it left the assembly line, and for a long time. So how much better is our final product than a used machine taken right off the street? Let's compare...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to give the eVo the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15" D x 19" T; weight is approx. 65 lbs.

 

 

     

 

  $1400

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE eVo 2010.5

Item #MTFEB10w

 

This Megatouch is part of the FORCE series and comes in the compact eVo cabinet. The eVo is the top product of the FORCE line-up, taking cues from previous models and packing everything into one unit behind a 15" LCD and flat touchscreen. The FORCE 2010.5 software is about as good as the FORCE series gets with 137 unique games, including new releases like Megatouch Memory, Touchdown Poker and Stunt Squirrel. Erotic and Kids Club games (either category enabled at one time) are also available and have been updated with even more content. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The eVo is the culmination of all previous FORCE models, but it is far from perfect. The main problem is that, with everything arranged and packed so close together inside, the eVo tends to overheat very quickly when the dust builds up and the small fans wear out. This overheating reduces the life of the components inside, meaning that the already poor quality hard drive, power supply and motherboard may only last 2-3 years instead of 4-6. Many eVos that we take in to refurbish may appear to work fine at first, but we take apart and rebuild the whole thing regardless to ENSURE that it works just like when it left the assembly line, and for a long time. So how much better is our final product than a used machine taken right off the street? Let's compare...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to give the eVo the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15" D x 19" T; weight is approx. 65 lbs.

 

 

     

 

  $1450

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Gametime 2008.5

Item #MTFGT08

 

This Megatouch was made exclusively for home use and is called the Gametime. It is incredibly light and small and has been converted to run the FORCE 2008.5 software. The FORCE 2008.5 software is loaded with 128 unique games including new titles like Photo Pop, Ink Rally, and Chainz 2. Erotic and Kids Club games (either category enabled at one time) are also available and have been updated for this software version. This machine is for home use (Free Play) only.

 

What's the difference?

 

The Gametime is similar to a FORCE eVo except that it has no money accepting components, has a silver color scheme and unique artwork, and is lighter and smaller. In fact, this is the lightest and smallest Megatouch you'll find with a stand, making it the perfect choice for a home use only machine.The Gametime comes with its own unique software, but we find that software to be far inferior to the regular/commercial FORCE software. So, we've converted this Gametime to run the FORCE software that everyone is used to. The hardware components inside are part of the FORCE platform, and as such they require service even though these units aren't as old as most other FORCE machines. For a list of what we do to give these machines a long, reliable service life, continue reading...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all Gametimes and eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to give the Gametime the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 16.5" W x 13.5" D x 17.5" T; weight is approx. 40 lbs.

 

 

     

 

  $1650

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Elite Edge 2007.5

Item #MTFEE07w

 

This Megatouch is part of the FORCE series and comes in the final cabinet of the series, the Elite Edge. The Elite Edge is very similar to the eVo, except that the display sits lower and the base allows for a larger bill acceptor stacker. The FORCE 2007.5 software is a best-seller and offers up 154 games including popular newcomers like Luxor, Chug Monkey, and Texas Hold'em. Erotic and Kids Club games (either category enabled at one time) are also available and plentiful. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Elite Edge is basically an eVo (the more common all-in-one compact model) with a base that is deeper and not as tall. This allows for a display that doesn't sit up as high as the eVos, and a 700 bill stacker instead of a 500. The main problems from the eVo still exist, in that everything is arranged and packed so close together inside that it tends to overheat very quickly. This overheating reduces the life of the components inside, meaning that the already poor quality hard drive, power supply and motherboard may only last 2-3 years instead of 4-6. Each Elite Edge that we take in, working or not, is taken apart and rebuilt to ENSURE that it works just like when it left the assembly line, and for a long time. So how much better is our final product than a used machine taken right off the street? Let's compare...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all Elite Edge units, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to give the Elite Edge the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15" D x 19" T; weight is approx. 65 lbs.

 

 

     

 

  $1325

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Elite Edge 2008.5

Item #MTFEE08w

 

This Megatouch is part of the FORCE series and comes in the final cabinet of the series, the Elite Edge. The Elite Edge is very similar to the eVo, except that the display sits lower and the base allows for a larger bill acceptor stacker. The FORCE 2008.5 software is loaded with 128 unique games including new titles like Photo Pop, Ink Rally, and Chainz 2. Erotic and Kids Club games (either category enabled at one time) are also available and have been updated for this software version. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Elite Edge is basically an eVo (the more common all-in-one compact model) with a base that is deeper and not as tall. This allows for a display that doesn't sit up as high as the eVos, and a 700 bill stacker instead of a 500. The main problems from the eVo still exist, in that everything is arranged and packed so close together inside that it tends to overheat very quickly. This overheating reduces the life of the components inside, meaning that the already poor quality hard drive, power supply and motherboard may only last 2-3 years instead of 4-6. Each Elite Edge that we take in, working or not, is taken apart and rebuilt to ENSURE that it works just like when it left the assembly line, and for a long time. So how much better is our final product than a used machine taken right off the street? Let's compare...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all Elite Edge units, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to give the Elite Edge the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15" D x 19" T; weight is approx. 65 lbs.

 

 

     

 

  $1375

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE eVo PORTABLE 2007.5

Item #MTFPORT

 

Ever wished you could play your favorite Megatouch games while sitting in something more comfortable than a bar stool? Now you can. This Megatouch is part of the FORCE series and comes in our custom eVo PORTABLE cabinet -- the only Megatouch that you can play anywhere in the house from your lap! It can also be played and stored while on our custom stand (pictured above). The FORCE 2007.5 software is a best-seller and offers up 154 games including popular newcomers like Luxor, Chug Monkey, and Texas Hold'em. Erotic and Kids Club games (either category enabled at one time) are also available and plentiful. This game is set to Free Play and is for home use only.

 

What's the difference?

 

We didn't make this cabinet, in fact all we did was remove (and slightly modify) the display portion from an eVo. This unit weighs just a tad more than a laptop, but is certainly light enough that anyone can carry it. You can play it from your lap while sitting on the couch, or you can play it while it rests on our stand. No matter how you measure it, this unit is smaller and more manageable than any other Megatouch out there. We are the first and only ones to offer this. Why? First, we like to think we're a little more creative than those that just flip or sell used games. Second, we're the only ones crazy enough to take apart an eVo, and sell you a portable (yet 100% playable) portion of it for LESS money! That makes this machine more affordable for you and more practical for home use.

 

Of course, we wouldn't sell a Megatouch without completely dis-assembling and refurbishing it. So let's take a look and what this machine has had done to it as compared to your usual (soon-to-be paperweight) used Megatouch...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
New fans all around to give this unit the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 4" D (without stand) x 15" T; weight is approx. 20 lbs.

 

 

     

 

  $1100

 

  + $35 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Upright 2006.5

Item #MTFUR06w

 

This Megatouch is part of the FORCE series and comes in the Upright cabinet, also known as a "stand-up" because it stands up rather than sitting on a bar or table, and players can stand up or sit on a chair to play it. The FORCE 2006.5 software offers great value with 130 games. Newer games include Texas Hold'em, Sudoku 6, Monkey Bash, and Feeding Frosty. Erotic and Kids Club games (either category enabled at one time) are also available with some newer games there as well. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Upright cabinet is much less common than all the other countertop Megatouches, but that doesn't mean it's not a good investment. The games are the same, most of the hardware is the same...it's just housed in a bigger cabinet (which makes it harder to move and ship) that can be placed anywhere. If you want a Megatouch but don't have a sturdy table surface to put one on, then an Upright or a Fusion (below) is the one for you. The hardware components in all FORCE machines are going bad now though, and this model is no exception. But with our refurbishing process, we keep these machines running and prevent them from becoming a boat anchor. Here is what we do vs what "they" don't do...

 

WHAT YOU GET FROM US VS MOST OTHERS
A bright and sharp 19" CRT (tube) monitor. All FORCE Uprights have Tatung brand monitors that are very reliable. But we check and service the chassis board anyways, and make sure the tube is good and the flyback transformer is like new. VS More often than not, a monitor tube that will become out of focus and have white "scan lines" after the machine is on for an hour. This is because the flyback goes bad, and rather than replacing it most people turn up the voltage knob. This can be repaired (we charge $200+) but usually there is permanent damage.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original power supply, now aged beyond its service life and sending improper and/or unfiltered voltages. This will and may have already caused damage to other parts of the machine.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 23" W x 28.5" D x 61" T; weight is approx. 225 lbs.

 

 

     

 

  $895

 

  + $325 flat rate shipping

    (click for details)

 

 


 

 

Megatouch FORCE Fusion 2008.5

Item #MTFF08w

 

This Megatouch is part of the FORCE series and comes in the Fusion cabinet. The Fusion is the newest upright (or "stand-up") cabinet design to date, with a thin, modern structure built around a flat 17" touchscreen and LCD. Unlike the traditional countertop Megatouches, this machine can be placed anywhere in a room -- no bar or table required. The FORCE 2008.5 software is loaded with 128 unique games including new titles like Photo Pop, Ink Rally, and Chainz 2. Erotic and Kids Club games (either category enabled at one time) are also available and have been updated for this software version. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Fusion is one of only two FORCE upright cabinet models, with all others being countertop models. That said, the Fusion is a superb option when compared to any Megatouch, and is without question the best of the two uprights. The 17" display/flatscreen is ergonomical and dependable, the cabinet is stylish while structurally sound, and best of all...there's still plenty of room inside for excellent airflow and easy maintenance. The only real downside to this model is that they didn't make enough of them! The common FORCE hardware components still require service with age, but other than that, this is a machine that you can literally stand behind. But to see what separates this Fusion from others you'll find, let's compare...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
No matter the age or condition of the motherboard, we remove it from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right; and when done right, the motherboard is ready for a long, reliable life. VS It's not a matter of IF it fails, but WHEN. Even in ideal conditions, some components on the motherboards in these machines need to be replaced. Motherboards can also die slowly, meaning that a "working" machine may be on the brink of needing expensive repair.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning.  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 20" W x 23" D x 61" T; weight is approx. 175 lbs.

 

 

     

 

  $1150

 

  + $325 flat rate shipping

    (click for details)

 

 


 

 

Megatouch ION eVo 2008.5

Item #MTIEB08w

 

This Megatouch is part of the ION series and comes in the compact ION eVo cabinet. The ION eVo is the next generation of the FORCE eVo, with all new hardware inside, a joystick, and a new silver color scheme all around. The ION 2008.5 software is loaded with over 140 games including new titles like Beer Pong, Photo Pop, Ink Rally, and Chainz 2. Erotic and Kids Club games (either category enabled at one time) are also available, with new video Erotic content in this version. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The ION eVo is part of the newer ION platform, but many of the same issues found on the FORCE eVo still exist. The main problem is that, with everything arranged and packed so close together inside, the eVo tends to overheat very quickly when the dust builds up and the small fans wear out. This overheating reduces the life of the components inside, meaning that the hard drive, power supply and motherboard don't last as long as they should. Actually, the motherboards in these machines weren't built to last long at all! So even if a 1-3 year old ION eVo looks decent and appears to work (if it powers on at all), we disassemble and rebuild the whole thing regardless so that it works BETTER than when it left the assembly line. If you don't believe us, we'd encourage you to find and ask an operator how reliable their IONs were; then compare that to some feedback from customers who bought our refurbished IONs. For more detail on our product compared to what you'll find pretty much everywhere else, read on...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
The motherboards in these IONs have horrible quality issues. So as a preventative measure, we remove the motherboard from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right. VS Merit (the manufacturer) services an enormous amount of failed ION motherboards under warranty, but they install the same, poor quality components! So if you buy a used ION without a warranty, you WILL have expensive issues, as sometimes these boards can not be repaired, and those who usually claim they can "repair" them just end up destroying them.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning. IONs also tend to have more touchscreen issues than other platforms.  
New fans all around to give the ION eVo the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15.5" D x 19.5" T; weight is approx. 60 lbs.

 

 

     

 

  $1600

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch ION eVo 2009.5

Item #MTIEB09w

 

This Megatouch is part of the ION series and comes in the compact ION eVo cabinet. The ION eVo is the next generation of the FORCE eVo, with all new hardware inside, a joystick, and a new silver color scheme all around. The ION 2009.5 software is packed with 147 games including newcomers Super Boxxi, Skee Ball, Fight the Landlord and more. Erotic and Kids Club games (either category enabled at one time) are also available, with even more Erotic content added to this version. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The ION eVo is part of the newer ION platform, but many of the same issues found on the FORCE eVo still exist. The main problem is that, with everything arranged and packed so close together inside, the eVo tends to overheat very quickly when the dust builds up and the small fans wear out. This overheating reduces the life of the components inside, meaning that the hard drive, power supply and motherboard don't last as long as they should. Actually, the motherboards in these machines weren't built to last long at all! So even if a 1-3 year old ION eVo looks decent and appears to work (if it powers on at all), we disassemble and rebuild the whole thing regardless so that it works BETTER than when it left the assembly line. If you don't believe us, we'd encourage you to find and ask an operator how reliable their IONs were; then compare that to some feedback from customers who bought our refurbished IONs. For more detail on our product compared to what you'll find pretty much everywhere else, read on...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
The motherboards in these IONs have horrible quality issues. So as a preventative measure, we remove the motherboard from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right. VS Merit (the manufacturer) services an enormous amount of failed ION motherboards under warranty, but they install the same, poor quality components! So if you buy a used ION without a warranty, you WILL have expensive issues, as sometimes these boards can not be repaired, and those who usually claim they can "repair" them just end up destroying them.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning. IONs also tend to have more touchscreen issues than other platforms.  
New fans all around to give the ION eVo the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15.5" D x 19.5" T; weight is approx. 60 lbs.

 

 

     

 

  $1650

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch ION eVo 2010.5

Item #MTIEB10w

 

This Megatouch is part of the ION series and comes in the compact ION eVo cabinet. The ION eVo is the next generation of the FORCE eVo, with all new hardware inside, a joystick, and a new silver color scheme all around. The ION 2010.5 software takes Megatouch to a new level with games like Little Shop Treasures, Jackpot Corner, and Brain in Gear, and many updates to classic titles. Erotic and Kids Club games (either category enabled at one time) are also available, with plenty of new Erotic content added to this version. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The ION eVo is part of the newer ION platform, but many of the same issues found on the FORCE eVo still exist. The main problem is that, with everything arranged and packed so close together inside, the eVo tends to overheat very quickly when the dust builds up and the small fans wear out. This overheating reduces the life of the components inside, meaning that the hard drive, power supply and motherboard don't last as long as they should. Actually, the motherboards in these machines weren't built to last long at all! So even if a 1-3 year old ION eVo looks decent and appears to work (if it powers on at all), we disassemble and rebuild the whole thing regardless so that it works BETTER than when it left the assembly line. If you don't believe us, we'd encourage you to find and ask an operator how reliable their IONs were; then compare that to some feedback from customers who bought our refurbished IONs. For more detail on our product compared to what you'll find pretty much everywhere else, read on...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
The motherboards in these IONs have horrible quality issues. So as a preventative measure, we remove the motherboard from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right. VS Merit (the manufacturer) services an enormous amount of failed ION motherboards under warranty, but they install the same, poor quality components! So if you buy a used ION without a warranty, you WILL have expensive issues, as sometimes these boards can not be repaired, and those who usually claim they can "repair" them just end up destroying them.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning. IONs also tend to have more touchscreen issues than other platforms.  
New fans all around to give the ION eVo the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15.5" D x 19.5" T; weight is approx. 60 lbs.

 

 

     

 

  $1725

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch ION Elite Edge 2010.5

Item #MTIEE10w

 

This Megatouch is part of the ION series and comes in the compact ION Elite Edge cabinet. The ION Elite Edge is the next generation of the FORCE Elite Edge, with all new hardware inside, a joystick, and a new silver color scheme all around. The Elite Edge is also very similar to the eVo, except that the display sits lower and the lit base allows for a larger bill acceptor stacker. The ION 2010.5 software takes Megatouch to a new level with games like Little Shop Treasures, Jackpot Corner, and Brain in Gear, and many updates to classic titles. Erotic and Kids Club games (either category enabled at one time) are also available, with plenty of new Erotic content added to this version. A dollar bill validator (DBV) is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The ION Elite Edge is part of the newer ION platform, but many of the same issues found on the FORCE Elite Edge still exist. The main problem is that, with everything arranged and packed so close together inside, the machine tends to overheat very quickly when the dust builds up and the small fans wear out. This overheating reduces the life of the components inside, meaning that the hard drive, power supply and motherboard don't last as long as they should. Actually, the motherboards in these machines weren't built to last long at all! So even if a 1-3 year old ION eVo looks decent and appears to work (if it powers on at all), we disassemble and rebuild the whole thing regardless so that it works BETTER than when it left the assembly line. If you don't believe us, we'd encourage you to find and ask an operator how reliable their IONs were; then compare that to some feedback from customers who bought our refurbished IONs. For more detail on our product compared to what you'll find pretty much everywhere else, read on...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
The motherboards in these IONs have horrible quality issues. So as a preventative measure, we remove the motherboard from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right. VS Merit (the manufacturer) services an enormous amount of failed ION motherboards under warranty, but they install the same, poor quality components! So if you buy a used ION without a warranty, you WILL have expensive issues, as sometimes these boards can not be repaired, and those who usually claim they can "repair" them just end up destroying them.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all Elite Edges, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning. IONs also tend to have more touchscreen issues than other platforms.  
New fans all around to give the ION eVo the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15.5" D x 19.5" T; weight is approx. 60 lbs.

 

 

     

 

  $1750

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Megatouch ION eVo PORTABLE 2009.5

Item #MTIPORT

 

Ever wished you could play your favorite Megatouch games while sitting in something more comfortable than a bar stool? Now you can. This Megatouch is part of the newer ION series and comes in our custom 17" ION eVo PORTABLE cabinet -- the only Megatouch that you can play anywhere in the house from your lap! It can also be played and stored while on our custom stand (pictured above). The ION 2009.5 software is packed with 147 games including newcomers Super Boxxi, Skee Ball, Fight the Landlord and more. Erotic and Kids Club games (either category enabled at one time) are also available, with even more Erotic content added to this version. This game is set to Free Play and is for home use only.

 

What's the difference?

 

We didn't make this cabinet, in fact all we did was remove (and slightly modify) the display portion from an eVo. This unit weighs just a tad more than a laptop, but is certainly light enough that anyone can carry it. You can play it from your lap while sitting on the couch, or you can play it while it rests on our stand. No matter how you measure it, this unit is smaller and more manageable than any other Megatouch out there. We are the first and only ones to offer this. Why? First, we like to think we're a little more creative than those that just flip or sell used games. Second, we're the only ones crazy enough to take apart an ION eVo, and sell you a portable (yet 100% playable) portion of it for LESS money! That makes this machine more affordable for you and more practical for home use.

 

Note that this unit differs from our FORCE Portable unit in that the display is 17" instead of 15", the marquee is backlit, and all hardware and software is part of the newer and faster ION platform. It also comes in silver only.

 

Of course, we wouldn't sell a Megatouch without completely dis-assembling and refurbishing it. So let's take a look and what this machine has had done to it as compared to your usual (soon-to-be paperweight) used Megatouch...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- separated during the re-build process to clean the notorious oil marks that build up along the edges between them. If the touchscreen has heavy scratches or the display has bad pixels/lines, we swap in a new one while putting it all back together. VS Typically, a touchscreen with oil smudges between it and the LCD. Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
The motherboards in these IONs have horrible quality issues. So as a preventative measure, we remove the motherboard from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right. VS Merit (the manufacturer) services an enormous amount of failed ION motherboards under warranty, but they install the same, poor quality components! So if you buy a used ION without a warranty, you WILL have expensive issues, as sometimes these boards can not be repaired, and those who usually claim they can "repair" them just end up destroying them.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
If the touchscreen isn't working 100% and free of major scratches, we replace it. We also provide instructions on how to keep it clean. VS A touschreen that may be good...or it may have deadspots from either scratches or improper cleaning. IONs also tend to have more touchscreen issues than other platforms.  
New fans all around to give the ION eVo the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine is overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 18" W x 4" D (without stand) x 17" T; weight is approx. 25 lbs.

 

 

     

 

  $1375

 

  + $35 flat rate shipping

    (click for details)

 

 


 

 

Megatouch ION Aurora 2010.5

Item #MTIA10

 

This Megatouch is part of the ION series and comes in the Aurora cabinet. The Aurora is a new-style cabinet design with a sleek, compact shape and a color-changing light show throughout the machine. The ION 2010.5 software takes Megatouch to a new level with games like Little Shop Treasures, Jackpot Corner, and Brain in Gear, and many updates to classic titles. Erotic and Kids Club games (either category enabled at one time) are also available, with plenty of new Erotic content added to this version. A dollar bill validator (DBV) and coin mech is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Aurora comes in a few different versions (17", 19", widescreen) and this is the 19" display version. Unlike previous IONs, the Aurora comes with adequate cooling (at the expense of a little more noise) so it is much more reliable. The components that are exected to fail sooner are also easier to access, and the motherboards in these units are of slightly better quality. Regardless, we service the motherboard and replace the power supply (and often the hard drive) so that the machine functions like new and stays that way for years to come. To compare our machine to one taken right off of location, read below...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- no notorious oil marks that build up along the edges between them, no heavy scratches on the touchscreen, and no bad pixels/lines in the display. VS Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
The motherboards in these IONs have horrible quality issues. So as a preventative measure, we remove the motherboard from the machine, clean it, and then service it by installing new components that are better than what it came with. We do all of this in-house so that we know the work is done right. VS Merit (the manufacturer) services an enormous amount of failed ION motherboards under warranty, but they install the same, poor quality components! So if you buy a used ION without a warranty, you WILL have expensive issues, as sometimes these boards can not be repaired, and those who usually claim they can "repair" them just end up destroying them.  
A new power supply that provides "clean" and accurate voltage to all other components. Our new replacements are better than the originals, in that they are more efficient, stay cooler and last longer. VS Likely the original, very low quality power supply that was put in all eVos, which tends to go bad fast and can take out other parts with it. Some wait until it's too late, and others don't attempt a replacement because of the "rat's nest of wires" inside.  
A clean, intact, and fully glowing halo. The plastic ring around the Aurora is often referred to as the "halo", and they tend to break. VS If that halo is cracked, you can expect to spend 4+ hours trying to replace it. Trust us...it's not easy!  
New rear case fans to give the ION eVo the proper cooling it NEEDS; often with better fans than what it came with to keep it even cooler and QUIETER. New fans are also relatively cheap insurance for a fully working machine. VS Almost always the original fans, which means that the machine may be overheating (thus being damaged) and NOISY. If the previous owner didn't care to replace a few $5 fans, what does that say about the care to the rest of the machine?  
A machine that has been completely taken apart, cleaned, and put back together properly with parts that are either new or function like new. This is a long process that, if charged at a typical labor rate by the hour, would cost hundreds of dollars easily. We finish off with new artwork, and locks WITH keys! VS A machine that hasn't been apart since it was put together at the factory. But it's been "cleaned" or "shopped" with a spray of Windex and canned air...because obviously that will clean up the years of smoke odor, stains, beer spills and dust clumps around and inside the machine (which you won't get in to without the keys)...right?  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15.5" D x 19.5" T; weight is approx. 60 lbs.

 

 

     

 

  $2295

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

JVL Retro iTouch10

Item #JVLRetro10

 

This is JVL Retro with iTouch10 software installed. The Retro is perhaps the most attractive countertop game out there with woodgrain accents, chrome trim and a flashy LED ring that is reminscent of the classic bubbler jukeboxes. The iTouch10 software is packed with over 150 games including newcomers like Bumper Wars, Count Your Fingers, and What A Mess. You can also choose to enable the Erotic category which offers a variety of adult games. A dollar bill validator (DBV) and coin mech is installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

The Retro is an awesome design and like most JVL countertop games it uses reliable hardware. There is no hard drive (or other moving parts for that matter), and unlike the Merit Megatouches the motherboard assembly is built to last! Regardless, we make sure all of the hardware is performing like it should, and we have the ability to test and repair components if necessary. Some Retro units are prone to having the chrome pieces damaged, but this one looks about as good as you'll find with only light wear on the sides. To compare our machine to one taken right off of location, read below...

 

WHAT YOU GET FROM US VS MOST OTHERS
A sharp LCD and a clean, accurate touchscreen -- no heavy scratches on the touchscreen, and no bad pixels/lines in the display. VS Sometimes, a heavily scratched touchscreen with deadspots, and/or dead pixels or rows of pixels on the LCD. Due to the cost of replacement and the risk in working with these fragile parts, most sellers won't mention problems here.  
A fully tested and clean motherboard assembly. If it had any issues, we repaired it and prepared it to last. VS A motherboard that "works" because the game comes on and plays fine for a few minutes. But it may have some faulty components, shoddy repair work or be coated in dirt.  
A clean, intact, and fully glowing LED ring. All colors work and are synchronized with the machine (ie it flashes certain colors/patterns in certain games as it should). VS If that plastic ring is cracked, or the LED system is broken, you can expect to spend a LOT of time and money repairing it.  
A machine that has been cleaned, inspected, and repaired PROPERLY with parts that are either new or function like new. VS A machine that hasn't been serviced or even inspected once after years of smoke odor, stains, beer spills and dust clumps around and inside the machine.  
A ONE YEAR WARRANTY from a reputable company and lifetime technical support. Our goal is not to just sell a clean, working machine, but sell a machine that we can KEEP working by doing the hard work up front and answering any questions or issues by phone and e-mail. VS In this business, it's usually "as-is" and "it worked when it left...sorry". Even if the seller is willing to help, one can quickly end up spending hundreds, even thousands of dollars to get a "bargain" machine working again. You can also end up with an impressive paperweight.  

 

Machine dimensions are 17" W x 15.5" D x 19.5" T; weight is approx. 60 lbs.

 

 

     

 

  $1975

 

  + $65 flat rate shipping

    (click for details)

 

 


 

 

Arctic Thunder

Item #arcticthunder

 

This is an Arctic Thunder game by Midway -- the last of the "Thunder" racing series and the last full-production game made by Midway. It is also the only arcade snowmobile game ever made, but has enough features (or "toys") to nearly be a simulator -- force feedback steering, a fan that blows in your face when you go fast, an illuminated tail light, and a rumble motor under the seat. The game itself is definitely an arcade game with crazy stunts, silly sound effects, power-ups, and more. Overall, Arctic Thunder is a great feature-laden game that can be played and enjoyed by anyone. Coin mechs are included, and pricing can be adjusted or set to Free Play.

 

What's the difference?

 

This machine is in great condition. The sideart is in above average condition and there is no cabinet damage. All of the plastics look very clean (not tan/UV faded like most now) and everything works 100%. The high resolution monitor has a perfect picture, with no fading. The seat, tail lens, fan and shaker motor are all in great working condition. On the inside, we've taken care of all the hardware with a new power supply and just-serviced computer. The latter part is very important, because the computers in these machines are failing fast when left un-serviced, and replacements are no longer available. Coin mechs, a coin box, and all keys are included.

 

 

     

 

  $1495

 

  + $395 flat rate shipping

    (click for details)

 

 


 

 

Target Toss Pro: BAGS

Item #TTPBAGS

 

This is a Target Toss Pro: BAGS by Incredible Technologies (IT). BAGS is played just like the real life backyard/tailgating game that is also known as "cornhole". The only difference here is that you play with a trackball. This is yet another addictive game from the same group that developed Golden Tee and Silverstrike Bowling. Coin mechs are included, and pricing can be adjusted or set to Free Play.

 

What's the difference?

 

This machine has been completely refurbished to look and play as close to new as possible. The 27" monitor has been serviced and looks great. The dedicated cabinet has very few scratches and has had new red T-molding installed. Corner protectors have been installed on the front. The control panel is clean and has new buttons, new switches, and a new glowing red transluscent trackball. The computer assembly has been serviced and inspected. Everything works 100% and is ready for a long service life, just like when new. New locks and keys are included.

 

Machine dimensions are 32" W x 45" D x 75" H; weight is approx. 375 lbs.

 

 

     

 

  $1245

 

  + $395 flat rate shipping

    (click for details)

 

 


 

 

Big Buck Hunter II: Sportsman's Paradise

Item #BBH2SPD

 

This is a Big Buck Hunter 2: Sportsman's Paradise by Incredible Technologies (IT) and Play Mechanix. Sportsman's Paradise is an updated version of the first Big Buck Hunter, and improves upon the original with multiple bucks per stand/round, different animal species, a huge variety of settings in various weather, and the ability for 1 to 4 players to compete in sequence. A dollar bill validator (DBV) and coin mechs are included, and pricing can be adjusted or set to Free Play.

 

What's the difference?

 

Most of these machines have been played so much that they are beat up and/or dead. This machine was spared and has been completely overhauled with the following:

  • NEW 27" Monitor
  • NEW Monitor Bezel
  • NEW Monitor Protective Glass
  • NEW Shotgun
  • NEW Start Button
  • NEW Marquee Light Fixture
  • NEW Power Supply
  • NEW Hard Drive
  • NEWLY SERVICED Motherboard Assembly (from IT)

This machine is as close to new (functionally and cosmetically) as you will ever find. Everything works 100%. New locks and keys are included.

 

Machine dimensions are 28" W x 33" D x 76" H; weight is approx. 375 lbs.

 

 

     

 

  $1395

 

  + $375 flat rate shipping

    (click for details)

 

 


 

 

Golden Tee fore! COMPLETE

Item #GTC

 

This is a Golden Tee fore! COMPLETE by Incredible Technologies (IT). If you're looking for a Golden Tee with a lot of "bang for the buck", then this is the machine for you. Golden Tee Complete is the final installment of the Golden Tee fore! series, and rather than having just five new courses like previous versions it includes every course from the series for a total of 29 courses. Hence, it is the "Complete" Golden Tee fore! package! Coin mechs are included, and pricing can be adjusted or set to Free Play. We can include a Tournament header by request.

 

What's the difference?

 

This machine has been completely refurbished to look and play as close to new as possible. The 27" monitor has been serviced and looks great. The dedicated cabinet has very few scratches and has had new white T-molding installed. The control panel is the newer silkscreen graphic style and is very clean, with new buttons, new switches, and a new white HAPP trackball. We also replace the monitor bezel and protective glass (when necessary). More importantly, we've overhauled the inside with a new power supply, new hard drive and serviced motherboard assembly. Everything works 100% and is ready for a long service life, just like when new. New locks and keys are included.

 

Machine dimensions are 32" W x 45" D x 75" H; weight is approx. 375 lbs.

 

 

     

 

  $1450

 

  + $395 flat rate shipping

    (click for details)

 

 


 

 

Hydro Thunder

Item #HTHUNDER

 

This is a Hydro Thunder, made by Midway in 1999. It is part of the "Thunder" series of racing games made by Midway. It is one of the few boat racing arcade games ever made and usually considered the best. Game features include a variable throttle for accelerating, a boost button, force feedback steering, and a subwoofer under the seat to simulate the rumble of a boat motor. The seat section can be separated for easier transportation. Coin mechs are included, and the price can be adjusted or set to Free Play.

 

What's the difference?

 

This is the standard sit-down version with a 27" monitor, which has been serviced and has an excellent picture. The computer assembly has also been serviced and works flawlessly. All lights and switches function properly. The cabinet is in very good condition with only minor scrapes and dings. The control panel is in good condition with no burn marks or abuse, just wear around the mounting points like every other Hydro Thunder out there. We come across a lot of these machines as many are just now being removed from location where they've still been making money, and we only pick the best ones to sell.

 

Machine dimensions are 32" W x 36" D x 74" H for the base unit, and 19" W x 37" D x 55" H for the seat unit. Total weight is approx. 375 lbs.

 

 

 

     

 

  $1195

 

  + $375 flat rate shipping

    (click for details)

 

 


 

 

Killer Instinct 2

Item #KI2

 

This is a Killer Instinct 2 by Midway. This game has becomeCoin mechs are included, and the price can be adjusted or set to Free Play.

 

What's the difference?

 

This is the standard sit-down version with a 27" monitor, which has been serviced and has an excellent picture. The computer assembly has also been serviced and works flawlessly. All lights and switches function properly. The cabinet is in very good condition with only minor scrapes and dings. The control panel is in good condition with no burn marks or abuse, just wear around the mounting points like every other Hydro Thunder out there. We come across a lot of these machines as many are just now being removed from location where they've still been making money, and we only pick the best ones to sell.

 

Machine dimensions are 32" W x 36" D x 74" H for the base unit, and 19" W x 37" D x 55" H for the seat unit. Total weight is approx. 375 lbs.

 

 

 

     

 

  $1195

 

  + $375 flat rate shipping

    (click for details)

 

 


 

 

Rockin' Bowl-O-Rama

Item #RBORw

 

This is a Rockin' Bowl-O-Rama, made by NAMCO in 2006. This is a wonderfully designed bowling game, with "a cabinet that will draw you in and a game that will take over." The unique cabinet definitely has a retro look and feel to it, and the game is the next best thing to actually going bowling. The game has four different modes (Regulation, Trick Shot, Blackjack Bowling, and Ten Pin Poker) and allows one to four players to play at a time. A dollar bill validator (DBV) and coin mech are installed, and the pricing can be adjusted or set to Free Play.

 

What's the difference?

 

This machine was a demo unit and is almost like new. All keys are included.

 

Machine dimensions are 31" W x 33" D x 63" H; weight is approx. 275 lbs.

 

 

     

 

  $1595

 

  + $375 flat rate shipping

    (click for details)

 

 


 

 

Star Wars Trilogy

Item #SWT

 

This is a Star Wars Trilogy by SEGA. The game is based completely off of the Star Wars trilogy of movies, from the graphics to the sounds and storylines. Players start the game by choosing from three intitial missions, which then branch into other missions to follow the movie storylines. Once the player has completed all of the selectable missions, they are faced with pivotal objectives like fighting Boba Fett, destroying the Death Star, and having a lightsaber duel with Darth Vador himself. Coin mechs are included, and the price can be adjusted or set to Free Play.

 

What's the difference?

 

This machine is in a dedicated upright cabinet that is in excellent condition with new white T-molding. The control panel and all of its components look great and function perfectly. The 27" monitor has a great picture with no burn-in or fading. The computer assembly has been cleaned and inspected and works 100%. The sound system also works perfectly with no missing channels, as is typical with these games. There is also a "deluxe sit-down" cabinet version for this game, but it uses a projection monitor that is no longer serviceable. If you are looking for a Star Wars themed game, this is the one to get.

 

 

     

 

  $1845

 

  + $395 flat rate shipping

    (click for details)

 

 


 

 

World Series of Poker Heads-Up Challenge

Item #POKERHUC

 

This is a World Series of Poker Heads-Up Challenge game by PokerTek. It is a free-standing table top game that allows two players to play No-Limit Texas Hold'em head to head (or "heads up"). The cabinet features a cocktail table height, tempered glass, sturdy base, and spill-resistant design. The game itself is fully automated, and each player has their own LCD screen, trackball and buttons to interact with. A dollar bill validator (DBV) is included.

 

What's the difference?

 

This machine was a demo unit and is like new. All keys and original paperwork are included.

 

Machine dimensions are 42" W x 27" D x 42" H; weight is approx. 200 lbs.

 

 

     

 

  $2595

 

  + $345 flat rate shipping

    (click for details)